Product Overview
Strip Cleaning Line systems are designed specifically for flat strip, sheet and coil surfaces. The process route is configured according to material, contamination type, strip width, line speed, surface grade and downstream process requirements.
Typical modules include alkaline or neutral degreasing, spray cleaning, brush cleaning, cascade rinsing, squeeze rolls, hot-air drying, filtration and water-treatment interfaces.
Configurable Process Modules
- Entry and exit strip handling for coil-to-coil, line-integrated or sheet-processing layouts.
- Degreasing, brushing and rinsing modules selected for rolling oil, emulsion, particles and surface residue.
- Squeeze and drying sections designed to reduce water carryover before annealing or finishing.
- Filtration, tank circulation and maintenance access configured for long-term cleanliness and serviceability.
| Cleaning line type | Typical materials | Width range | Thickness range | Line speed | Main modules |
|---|---|---|---|---|---|
| Strip degreasing cleaning line | Stainless steel, silicon steel and carbon steel strip | 350-1780 mm | 0.03-3.0 mm | 80-300 m/min | Entry tension, alkaline or neutral degreasing, brushing, spray rinsing, squeeze rolls, hot-air drying, filtration and water-treatment interface. |
| High-speed precision strip cleaning line | Stainless steel, silicon steel and precision cold-rolled strip | 450-1450 mm | 0.05-1.5 mm | 150-500 m/min | High-pressure spray, double-side brushing, multi-stage rinsing, hot-air or air-knife drying, fine filtration, conductivity and temperature control. |
| Copper and copper-alloy degreasing line | Copper strip, copper-alloy strip and non-ferrous metal strip | 350-1250 mm | 0.05-2.5 mm | 60-250 m/min | Degreasing, soft-brush cleaning, rinsing, squeeze rolls, hot-air drying and chemical circulation filtration. |
| Sheet and plate cleaning machine | Stainless steel sheet, aluminum sheet and carbon steel sheet | 600-1600 mm | 0.3-6.0 mm | 5-30 m/min | Conveying, spray cleaning, brushing, rinsing and air-knife or hot-air drying. |
Reference ranges are organized from the supplied cleaning-machine parameter workbook and should be confirmed against material, oil type, cleanliness target, strip tension and plant utility conditions.
Typical Applications
- Stainless steel, silicon steel and carbon steel strip cleaning before annealing or finishing.
- Cleaning after cold rolling and before tension leveling, coating, slitting or inspection.
- Surface-sensitive flat products where residue control and strip protection are important.